Edgebanding thickness: .4mm to 6mm (.016 to 1/4")
• Guillotine capacity: 3mm
• Feed speed: 2 speed 40/60 fpm
• Panel height: 3/8" min to 2-1/8" max.
• Minimum panel length: 5-1/2"
• Minimum panel width: 2-3/8"
• Minimum distance between panels: 20"
• "Startouch" controller featuring a 12" touchscreen display, capable
of storing up to 100 programs
• Anti-adhesive unit positioned prior to pre-millling unit prevents
build-up of glue on top and bottom of panel
• Strip feed magazine
• SGP "Smart Glue Pot" • Quick heat up time due to the small glue
pot. Reverse rotation of the glue roller for the application of solid
wood. Double Thermo Regulation for easy use of both EVA and PUR
glue. Color change and glue pot cleaning are able to be completed
in minutes, as opposed to hours. Perfect dosing and special
spreading roller create the perfect joint line.
• "RT-V" Pre-milling station with (2) 2.0 HP motors, to rectify/clean
panels already sized
• Pressure station with pneumatic driven roller and (2) spring loaded
idle rollers
• "K-SEL 2" End trimming station with (2) independent 0.50 HP motors
mounted on THK guides – with auto tilting of the unit from the
control panel with two preset positions
• "R/K" Top and bottom trim station composed of (2) independent 0.7
HP motors, as well as three position pneumatics to easily go from
thin tape to 3 mm PVC (includes three roller nesting kit on top trim
unit, beneficial when running panels with grooves and/or 35 mm
hinge holes)
• "Round-X" corner rounding unit composed of (2) independent 0.50
HP motors that slide on THK guides – can go from thin tape to 3 mm
PVC through the controller with no manual adjustments by operator
• "RAS/K" profile scraping unit designed to remove knife marks,
equipped with pneumatic in/out positioning through controller (top
profile scrape unit is equipped with three roller nesting kit,
beneficial when running panels with grooves and/or 35 mm hinge
holes
• "RC-V" Glue scraping unit eliminates any excess glue –
pneumatically positioned through the controller
• "SP-V" Buffing unit consisting of (2) independent 0.25 HP motors,
tiltable to 12 degrees
• Air requirements: 90 PSI
• Dust collection requirements: 3,250 cfm
• Electrical requirements: 57 amps @ 230 volt
• Dimensions: 182" x 67" x 59"
• Machine weight: 4,008 lbs.