Used Pillar Model M-45 Miter, Mortise and Tenon Machining.
Year: 2018.
Serial number: PM-050-18-M45-5
The model M-45 is a 3 Axis Miter, Mortise, and Tenon Machining Center. Parts are placed into the work zones, referencing the back and side fences. The green palm button is pressed and the clamps secure the part into place. The machining is ready to begin in the work zone. There are 2 zones standard in the M-45 allowing for pendulum processing. While the one part is being machined, the other zone can be loaded and queued for machining. There are two CNC controlled axis in the X (left to right) and Z (up and down) , the Y axis (in and out) is performed with adjustable pneumatic cylinder. Offering flexibility as well as productivity, the M-45 provides high quality mitered mortise and tenon parts for use in cabinet door construction.
The M-45 will produce up to 200 doors per 8 hour shift.
Machining Capacities:
Material Length: Min: 4 1/2", Max: Not Applicable unless machine equipped with Accu-Gauge
Material Width: Min: 1.5", Max: 3 ½"
Material Thickness: Min: 5/8" , Max: 1"
Operating Voltage: 208-230 3PH 30 Amp
Air Consumption: 5 cfm *
Service Pressure: 80-100 psi *
A 15" High Resolution Industrial Touch screen is used for the operatorinterface to store, recall, and run programs. The M-45 frame is constructed of an all welded 1/4" tubular steel frame for rigidity and accuracy. The Miter and Tenon Zone is equipped with a 7.25 HP High frequency 17,000 RPM Direct Drive Router Spindle. The Mortise Zone is equipped with a 3 HP High Frequency 24,000 RPM Direct Drive Mortise Router Spindle.
MORTISE AND TENON TOOLING PACKAGE
Package Includes:
(1) 2" diameter Tenon Cutter head with replaceable carbide inserts.
(1) 3/8" diameter High Speed Steel Mortise bit
(1) 3/8" Collet (ER25)
(1) 3/4" Collet (ER32)
(1) Cover Nut (ER25)
(1) Cover Nut (ER32)
(4) Spindle Wrenches