"Eye-M" Mobile Console:

• Full HD display resolution 1920x1080
• LED lighting
• Cmulti-touch screen – 10 points of contact
• Wide visual angle 176° Horizontal / 160° Vertical
• "Zero Pixel Defect" quality
• Intel Pentium – 2,9 Ghz
• RAM 4GB – DDR4
• Hard disk: 500GB – 7200rpm
• O.S. Windows Embedded Standard 7 - 64bit
• QWERTY keyboard with english layout
• Wired mouse – 3 functions
• Ethernet port RJ45
• USB port 3.0 protocol supported
• Nominal operating temperature: +5°C / +35°C

Electric cabinet with Air Conditioning device:

It maintains temperature of approx. 65°F inside the electric cabinet.

Remote Control Pendent:

This remote control pendent allows the operator to freely move around the machine and control the machines functions without being restricted to the computer console.

16.5 HP (S6) Electrospindle Routing Unit:

The routing unit is equipped with a power electro spindle and automatic tool changer. The unit is mounted directly to the machine mobile upright.

It includes:

• HSK F 63 quick release tool-holder
• 1500-24000 rpm spindle speed
• (S1/S6) 8,5 /12 kW (11,5/16.5hp) constant motor power from 12000 to 18.000 rpm
• Right and left rotation
• Static inverter for continuous speed and rapid shutdown of rotation
• Cooling by coaxial air flow
• Exhaust hood around whole perimeter (200 mm diameter)

Rear 16 Position Tool Changer

F37L2 boring head (25+8+4+blade in X-Y):

• No. 25 independent vertical spindles (12 right and 13 left)
• No. 6 horizontal double drilling heads (1+1), 4 along X direction and 2 along Y direction
• Attachment for bits: 10 mm diameter
• Rapid bits locking with 1 screw
• Center to-Center distance between axes: 32 mm
• Rotation speed: 4.500 rpm, with inverter 8000 rpm maximum
• No. 1 integrated blade with 0-90° automatic rotation (160 mm max. diameter)
• Blade rotation speed: 3.500 rpm, with inverter 6.500 rpm maximum
• 3,6 kW (S6) motor power
• Vertical pneumatic ON/OFF stroke of each vertical spindle: 60 mm

Morbidelli M400 F, Aluminum Table 3650 x 1600 (143" x 62.9")

Multi-functional worktable designed and engineered by SCM for maximum flexibility and holding power. It is made entirely of extruded aluminum and it is fixed directly to the machine base to ensure rigidity and prevent any vibrations.

Technical specifications:

• Drilled and tapped holes spaced 120x120 mm (4.72"x4.72")for vacuum connection and equipment fastening.
• Groove pattern spaced 40 mm (1.57") for suction cups or rubber seals
• N. 9 work areas
• Max. dimension to work in Y direction = 1665mm (65.5")
• Front and Rear Split Rails

Nine (9) Electronic Vacuum Zones

Qty 2 – 360 M3/HR Vacuum pumps (Total 720 M3/HR)

High Efficiency Claw Vacuum

Material Handling System For Nesting Cell (Left To Right)

Automatic Unloading

Device mounted on the machine upright that moves the workpieces towards the unloading area on the machine right side. This device cleans the spoil board while it unloads the components. The off loading system is equipped with automatic valves which are opened during the cleaning operation.

Outfeed Belt

Powered belt capable of moving components from the machine table to the unloading position. This position is equipped with photocell automatic detecting system for the belt start/stop and pushbutton for the belt manual speed. (1)-200mm Opening from the bottom. (2) -200mm Openings from the Top

Automatic Central Lube System

The correct amount of grease is applied to lubricate moving parts on the machine. This is applied automatically with minimal maintenance for the operator.