Service That Starts Day OneLearn More
Product details
Drilling, sawing, sanding or machining wood products can expose you to wood dust, a substance known to the State of California to cause cancer. Avoid inhaling wood dust or use a dust mask or other safeguards for personal protection. For more information go to www.P65Warnings.ca.gov/wood
| Manufacturer: | Pat Mooney |
| Part Number: | PMI-14 |
| MPN: | PMI-14 |
The PMI-14 A is a 45-degree double-blade angular sawing machine built for fast, clean, and accurate cutting of non-ferrous materials. With two 45° staggered blades, it completes opposing cuts in a single pass, minimizing waste and cycle time. Engineered for efficiency and repeatability, this system is especially valuable for high-volume frame manufacturers. Its precise blade control, rigid construction, and intelligent clamping deliver high-quality, burr-free finishes with every cycle.
Key Features & Benefits
Dual 45-deg Saw Blades for Simultaneous Precision Cutting
• Both saw blades are vertically positioned at opposing 45-deg angles for symmetrical miters
• This allows for two matching cuts in a single pass, reducing processing time
• The setup is ideal for aluminum door and window frames requiring tight corner joints
Independent Vertical Feed for Accuracy and Cycle Speed
• Each saw travels on precision-machined shafts for clean, accurate movement
• Blade feed is driven by a pneumatic cylinder, allowing complete control of feed rate
• This ensures efficient material penetration while preserving blade life
High-Torque Motors for Consistent Cutting Power
• Each saw blade is powered by an individual 2 HP motor to maintain cutting force
• Motors are matched to blade specs for optimal torque and clean shearing action
• Enables reliable, repeatable cuts on soft metals and extrusions of varying wall thickness
Pneumatic Clamping System Minimizes Material Distortion
• The PMI-14 A uses both vertical and horizontal clamps for secure part positioning
• Adjustable clamping pressure protects delicate or thin-walled profiles from crushing
• The system prevents movement during cutting, preserving angular accuracy
Precision Mist Lubrication for Blade Cooling and Clean Cuts
• A controlled mist system delivers lubricant exactly where needed
• This extends blade life by reducing heat buildup and friction during cuts
• It also keeps the cut zone clean for smooth finishes and reduced maintenance
Operator Safety with Built-In Protections
• A fully enclosed cutting area shields the operator during blade motion
• A door-mounted safety limit switch disables operation when open
• This ensures safe blade access and complies with standard safety protocols
Key Features & Benefits
Dual 45-deg Saw Blades for Simultaneous Precision Cutting
• Both saw blades are vertically positioned at opposing 45-deg angles for symmetrical miters
• This allows for two matching cuts in a single pass, reducing processing time
• The setup is ideal for aluminum door and window frames requiring tight corner joints
Independent Vertical Feed for Accuracy and Cycle Speed
• Each saw travels on precision-machined shafts for clean, accurate movement
• Blade feed is driven by a pneumatic cylinder, allowing complete control of feed rate
• This ensures efficient material penetration while preserving blade life
High-Torque Motors for Consistent Cutting Power
• Each saw blade is powered by an individual 2 HP motor to maintain cutting force
• Motors are matched to blade specs for optimal torque and clean shearing action
• Enables reliable, repeatable cuts on soft metals and extrusions of varying wall thickness
Pneumatic Clamping System Minimizes Material Distortion
• The PMI-14 A uses both vertical and horizontal clamps for secure part positioning
• Adjustable clamping pressure protects delicate or thin-walled profiles from crushing
• The system prevents movement during cutting, preserving angular accuracy
Precision Mist Lubrication for Blade Cooling and Clean Cuts
• A controlled mist system delivers lubricant exactly where needed
• This extends blade life by reducing heat buildup and friction during cuts
• It also keeps the cut zone clean for smooth finishes and reduced maintenance
Operator Safety with Built-In Protections
• A fully enclosed cutting area shields the operator during blade motion
• A door-mounted safety limit switch disables operation when open
• This ensures safe blade access and complies with standard safety protocols
Specifications
Manufacturer Pat Mooney Part Number PMI-14 Manufacturer's Part PMI-14 Weight 999,999.000 lbs Blade Size 14" x 1" Bore Cutting Angle 45 Degree Saw Blade Motor 2 HP Machine Size 1370mm (53.93") x 820mm (32.28") x 1310mm (51.57") Cutting Height 3.93" (100 mm) / 5.51" (140 mm) Cutting Width 3.93" (100 mm) / 3.54" (90 mm) Working Height 32.67"
