MACHINE FEATURES: Moving gantry (stationary table) type machine  equipped  with  1 (one) 18  HP  4-pole  air-cooled router   spindle,   with   grease lubricated ceramic bearings,  a 10-Position Automatic     Tool Changing   System,   with tool length touch   probe, and 1 (one)   2   HP,   multiple   spindle boring unit with 16 independently selectable spindles for vertical drilling, and 4 horizontal boring   spindles. The  spindle  motor  is  powered by   an   electronic   AC   inverter drive    system with dynamic spindle braking. Full Torque is achieved at 9,000 RPM & Full HP is achieved at 12,000 RPM.The Automatic Tool Changer Carousel, with Steel Tool Holder Clips, is mounted on the spindle carriage, next to the Router Spindle, for fast and efficient tool changes.X  &Y  axes  are  constructed  of massive,    heavy    duty    welded steel  construction  with  multiple reinforcements to increase strength and absorb vibration. Z-axis    spindle carriage is a specially designed Meehanite casting for high   strength   and inherent    vibration    dampening characteristics  with  a  pneumatic counterbalance system for smooth and accurate operation.Hardened and precision STARlinear guide way systems with recirculating roller linear bearings are provided for all primary movements in the X, Y & Z axes. Hardened precision ground ball screws with anti-backlash ball nuts are provided for all primary movements of the Z axis.  The X-Axis is a dual drive, dual support, 2-channel system, using twin industrial grade, induction hardened, helical racks and pinions.The Y-Axis is also driven with helical rack & pinion.

The vacuum table is made of torsion resistant cast steel, covered with a 30mm thick phenolic grid table top for the quick and easy mounting of work pieces via pods, clamps, spoil-boards, or holding fixtures.  Includes Four (4) pneumatically controlled Pop-up pins for part location & two (2) pneumatically controlled Pop-Up GUIDE RAILS around the table perimeter for Nested Based Manufacturing

The table is configured with four automatic vacuum zones, which are m-code controlled.  The vacuum zones are equipped with an electronic safety barrier and low vacuum sensor. This table and pump combination will allow a wide range of flexibility in holding large & small work pieces. State-of-the-art closed loop FANUC AC digital servo motors are utilized on X, Y & Z axis. 
 
Automatic oil lubrication is utilized for X & Y guide ways & ball screws.  Centrally located grease fittings are utilized for end bearings and profiled linear guide ways. All guides are protected from dust and other contaminates by double sealed wipers. The operator control panel has a Handheld Pendant with separate Feed Rate & Rapid Rate Override.  A dust collection hood with automatic damper system is provided for the router spindle, and pusher/sweeper system. ?